technical data sheet 7-16 gauge jack 60W00K-000 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h documents application note an001 calibration services material and plating connector parts material plating center and outer contact stainless steel n/a coupling nut brass flash white bronze over silver(e .g. optargen?) gauge block body stainless steel n/a mechanical data gauge block nominal gauge 1.77 mm gauge range 1.77 mm 0.5 mm scale gradation 1 m limit of measurement error 1, 2 10 m typical measurement error 1, 2 7 m measuring force 1.5 n 1 when zeroed with gauge block 2 1.73 mm to 1.89 mm
technical data sheet 7-16 gauge jack 60W00K-000 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg declaration of calibration options factory calibration standard delivery for this gauge includes a factory calibration. the calibration certificate issued re ports individual mechanical calibration results, traceabl e to national / international standards. accredited calibration not available. for further, more detailed information see applicat ion note an001 on the rosenberger homepage. calibration interval recommendation 12 months packing standard 1 pce in box weight 367.8 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 02.05.05 martin moder 09.11.15 e0 0 14-1492 maik knoll 09.11.15 while the information has been carefully compiled to the best of our knowledge, no thing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
